Usage places :

1. In Wastewater Treatment Facilities
2. Disposal of domestic and industrial raw wastewater
3. In Drainage and Evacuation Works
4. Disposal of rain water

Design Features:

• The pump shaft is centered with two bearings.
• The housing part containing the bearings was removed from the water environment and its contact with water was cut off.
• In the volute body, there are drain holes on the intermediate sleeve to prevent water leaks that occur over time in the throat part of the shaft from reaching the bearing.
• The suction part is protected from large size waste with a grid type filter.
• The body part is made of steel.
• Snail body and fan are in GG22 casting quality.